BF PRINT 03

BF PRINT03 is a mix of polyurethane and PVC (50%+50%) white opaque film printable with solvent, eco-solvent and latex inks. BFPRINT03 is suitable for heat transfer on cotton fabrics, polyester and acrylic garments. Thanks to its self-adhesive carrier, the film can be easily cut by all current cutting plotters after the printing process and because of its thickness can be removed and places on all garments by hand without liner.

Clear

Description

 BF PRINT03 is a mix of polyurethane and PVC (50%+50%) white opaque film printable with solvent, eco-solvent and latex inks. BFPRINT03 is suitable for heat transfer on cotton fabrics, polyester and acrylic garments. Thanks to its self-adhesive carrier, the film can be easily cut by all current cutting plotters after the printing process and because of its thickness can be removed and places on all garments by hand without liner. 


Alternatively, if preferred, we suggest to use the BF MYLAR film as a transfer tape and then remove it while hot. 

Additional information

Cutting

Cutting Plotter – 45º Blade

Finish

Matte

Liner Removal

Hot

Press Time

12 Seconds

Press Temperature

145°C / 295°F

Suggested Fabrics

Cotton, Poly / Cotton Mix, Polyester

Thickness

120μ

Transparency

Non-transparent

Washing

Wait 12 hrs after application

Data Sheet

BF PRINT 03 Data Sheet

B-Flex Catalogue 2021

+61 2 8662 0801

Eastern Creek NSW 2766
Australia

info@b-flexpacific.com

Have a question? Get in touch with us today. We’d love to hear from you

Shopping cart close